www.StepperMotorCanada.ca is owned and operated by Pro Power Electric. Copyright (C) 2019. All rights reserved.
No material may be reproduced in part or in whole without written consent from holders.
No material may be reproduced in part or in whole without written consent from holders.
Digital stepper motor driver, 32-bit DSP.
20Vac-60Vac, 2.0-6.0 Amp, 2 Phase, AC / DC input.
Over voltage, over current, short circuit protection.
Automatic idle-current reduction.
20Vac-60Vac, 2.0-6.0 Amp, 2 Phase, AC / DC input.
Over voltage, over current, short circuit protection.
Automatic idle-current reduction.
Nema 34 Digital D2060AC Micro Driver
Price $120.00
12Vdc-35Vdc, 0.2 - 2.0 Amp, 2 Phase
Over voltage, over current, short circuit protection
Automatic idle-current reduction
Over voltage, over current, short circuit protection
Automatic idle-current reduction
Nema 17 Micro Stepper Driver JK0220
Price $50.00
The DM860AC is a digital stepper motor driver which adopts 32-bit DSP control technology and built-in microstepping technology.
18Vac-80Vac, 2.0-6.0 Amp, 2 Phase, AC / DC input.
Over voltage, over current, short circuit protection,
automatic idle-current reduction and built in fan.
18Vac-80Vac, 2.0-6.0 Amp, 2 Phase, AC / DC input.
Over voltage, over current, short circuit protection,
automatic idle-current reduction and built in fan.
Nema 34 Digital Stepper Driver DM860AC
Out of stock.
Nema 23 Micro Stepper Driver 2DM556
Price $85.00
24Vdc-60Vdc, 1.0 - 4.0 Amp, 2 Phase
Over voltage, over current, short circuit protection
Automatic idle-current reduction
Over voltage, over current, short circuit protection
Automatic idle-current reduction
The 2DM860H is the latest digital stepper motor driver which adopts 32-bit DSP control technology and built-in microstepping technology.
18Vac-80Vac, 2.0 - 6.0 Amp, 2 Phase.
18Vac-80Vac, 2.0 - 6.0 Amp, 2 Phase.
Nema 34 Digital Stepper Driver 2DM860H
Price $130.00
This controller connects to RJ45 connection ports on some stepper motor drivers allowing finer adjustments to the driver. Works with the 2DM860H, DM860AC, UCD20504, 2DM556, 2DM542 .
Refer to the owners manual of your driver for specific use.
Refer to the owners manual of your driver for specific use.
Handheld Intelligent Setting Unit
Price $30.00
Out of stock
Not all drivers provide 1 : 1 micro stepping (200 steps per/rev).
Check documentation to see what minimums are selectable.
If this is a concern, please call or email so the right product is selected for your set up.
Check documentation to see what minimums are selectable.
If this is a concern, please call or email so the right product is selected for your set up.
Note:
Where can I buy Nema17 stepper drivers?
Where can I buy Nema23 stepper drivers?
Where can I buy Nema34 stepper drivers?
Stepper drivers Canada.
Stepper drivers Ontario.
Stepper drivers Alberta.
Stepper drivers British Columbia.
Stepper drivers Saskatchewan.
Where can I buy Stepper drivers locally?
Stepper drives.
Where can I buy Nema23 stepper drivers?
Where can I buy Nema34 stepper drivers?
Stepper drivers Canada.
Stepper drivers Ontario.
Stepper drivers Alberta.
Stepper drivers British Columbia.
Stepper drivers Saskatchewan.
Where can I buy Stepper drivers locally?
Stepper drives.
12Vdc-24Vdc, 0.2 - 2.0 Amp, 2 Phase
Open case design with heat sink
Decay and Excitation adjustment
20%,50% Automatic idle-current reduction
Open case design with heat sink
Decay and Excitation adjustment
20%,50% Automatic idle-current reduction
Nema 17 Stepper Driver ZK15004B
Price $20.00
4 axis all in one driver for easy set up.
Designed for Nema 17, 23, 34 motors.
24 - 60 VDC / 6.0A 2 Phase.
Line printer port support.
No break out board required, on board.
Designed for Nema 17, 23, 34 motors.
24 - 60 VDC / 6.0A 2 Phase.
Line printer port support.
No break out board required, on board.
Leadshine MX4660 - 4 Axis Driver
Out of Stock.
Leadshine MX3660 - 3 Axis Driver
Out of stock.
Nema 17 Stepper Driver TB6600HG
Nema 17, 23 Stepper Motor Driver 2DM542
24Vdc-48Vdc, 1.0 - 4.0 Amp, 2 Phase
Over voltage, over current, short circuit protection
Automatic idle-current reduction
Over voltage, over current, short circuit protection
Automatic idle-current reduction
12Vdc-35Vdc, 0.2 - 2.0 Amp, 2 Phase
Open case design with heat sink
Decay and Excitation adjustment
20%,50% Automatic idle-current reduction
Open case design with heat sink
Decay and Excitation adjustment
20%,50% Automatic idle-current reduction
Price $75.00
Price $30.00
3 axis all in one driver for easy set up.
Designed for Nema 17, 23, 34 motors.
24 - 60 VDC / 6.0A 2 Phase.
Line printer port support.
No break out board required, on board.
Designed for Nema 17, 23, 34 motors.
24 - 60 VDC / 6.0A 2 Phase.
Line printer port support.
No break out board required, on board.
Nema 23 D5056S Micro Stepper Driver
Price $80.00
32-bit DSP technology
24Vdc-60Vdc, 1.5 - 4.0 Amp, 2 Phase
Over voltage, over current, short circuit protection
Automatic idle-current reduction
24Vdc-60Vdc, 1.5 - 4.0 Amp, 2 Phase
Over voltage, over current, short circuit protection
Automatic idle-current reduction
Drivers
